About
Professor, Doctor of Engineering, graduate supervisor, affiliated with the School of Mechanical and Automotive Engineering at South China University of Technology, currently employed at the National Engineering Research Center for Novel Polymer Molding Equipment and the Key Laboratory of Polymer Molding and Processing Engineering, Ministry of Education.
Education
(1)From September 1986 to July 1990, I attended Gansu University of Technology (now Lanzhou University of Technology) for my undergraduate studies in Mechanical Engineering (2)From September 1990 to July 1993, I studied at Gansu University of Technology (now Lanzhou University of Technology) for a master's degree in Mechanical and Electrical Engineering (3)From September 1993 to October 1997, I studied Metal Plastic Forming at Huazhong University of Science and Technology (now Huazhong University of Science and Technology), obtaining a PhD degree
Research
(1)Mechanical and Electrical Equipment and Its Intelligent Control Technology The research focuses on intelligent equipment and process control, utilizing embedded microcontroller systems, PLCs, and industrial control computers for data acquisition, processing, and control, and developing intelligent control software and hardware systems. (2)Mold CAD/CAE/CAM The research focuses on computer-aided design, manufacturing, and engineering analysis of molds. Utilizing various advanced technologies such as 3D CAD software, CAE analysis software, and additive manufacturing technology to shorten the cycle of mold design and manufacturing, improve trial mold efficiency, reduce production costs, and minimize market risks.
Thesis
- Cai Zhenlin;Liu Bin;Wen Jinsong,基于 ShuffleNetv2-plus-YOLOX 算法的压铸件缺陷检测,Tezhong Zhuzao Ji Youse Hejin/Special Casting and Nonferrous Alloys,2024
- 蔡振林;刘斌;文劲松,基于ShuffleNetv2-plus-YOLOX算法的压铸制品缺陷检测,特种铸造及有色合金,2023
- 刘斌;叶红叶;王玉香;张涛,316L/POM复合材料熔融沉积成型件的催化脱脂工艺研究,粉末冶金技术,2022
- 赖万斌;刘斌;龚德文,基于PLC的电力电缆敷设控制系统设计与应用,仪表技术与传感器,2022
- 刘斌;蔡振林;叶红叶;文劲松,基于机器视觉的压铸模缺陷检测概述,模具工业,2022
- 赖万斌;刘斌;龚德文,基于PLC的电力电缆敷设控制系统设计与应用,仪表技术与传感器,2022
- 刘斌;龙健宁;程方毅;龚德文,基于卷积神经网络的物流货物图像分类研究,机电工程技术,2021
- 刘斌;龙健宁;程方毅;龚德文,基于卷积神经网络的物流货物图像分类研究,机电工程技术,2021
- 刘斌;程方毅;龚德文,图像自动识别技术在物流自动化中的研究与应用现状分析,机电工程技术,2020
- 刘斌;龙健宁;吴晟霖;袁道明;张涛,基于ATmega2560的金属FDM打印设备控制系统设计,机械与电子,2020
- 刘斌;闫竹辉,带金属嵌件注射成型工艺研究现状及分析,模具工业,2020
- 龙健宁;刘斌;龚德文,基于Object Detection API的物流单元货架目标检测,自动化与仪表,2020
- 刘斌;王玉香;林梓威;张涛,316L/POM复合材料FDM成型件成型质量的研究,塑料科技,2020
- 闫竹辉;刘斌,多向抽芯汽车空调出风口壳体注塑模具设计,工程塑料应用,2020
- 闫竹辉;刘斌,多种抽芯机构的汽车内门把手座注塑模设计,工程塑料应用,2020
- 闫竹辉;刘斌;黄强,汽车接插件二次注射成型模具设计,工程塑料应用,2020
- Liu, Bin;Wang, Yuxiang;Lin, Ziwei;Zhang, Tao,Creating metal parts by Fused Deposition Modeling and Sintering,Materials Letters,2020
- 闫竹辉;刘斌,汽车灯罩壳体注射模设计,模具工业,2020
- 刘斌;闫竹辉;林梓威,电热水壶塑料底座环状浇口模内热切注射模设计,模具工业,2019
- 李敏;刘斌,群腔PET瓶坯模具浇注系统设计与CAE分析,塑料工业,2019
- 刘斌;吴茜,汽车后视镜壳的随形冷却水道注塑模具设计,塑料,2019
- 刘斌;崔志杰,大直径塑料管道成型牵引装置开发进展,塑料,2018
- 刘斌;林梓威;吴茜,仿血管模型的随形冷却水道设计与优化,工程塑料应用,2018
- 刘斌;吴晟霖;谭景焕;白春生;刘炳辉,聚合物熔体喷射堆砌成型设备的研制,塑料工业,2018
- 刘斌;林梓威,基于互联网的模具行业规模化生产模式探讨,模具工业,2018
- 李敏;刘斌,基于ANSYS的群腔瓶坯模热流道板温度场分析与应用,塑料工业,2018
- 刘斌;林梓威;黄强,推杆加推件板二次顶出脱模机构设计,模具工业,2018
- 刘斌;吴晟霖;崔志杰;黄强,注射模旋转型芯的限位装置设计,模具工业,2018
- 刘斌;林梓威;黄强,汽车后视镜支架二次抽芯机构设计,模具工业,2018
- 刘斌;吴晟霖;崔志杰;黄强,局部薄壁制品注射成型装置设计,模具工业,2018
- 吴茜;刘斌,模具材料研究与应用现状及发展趋势,模具工业,2017
- 刘斌;谭景焕,现代模具设计技术的现状及发展趋势,塑料工业,2017
- 刘斌;吴茜,注塑模具随形冷却水道的设计方法与分析,工程塑料应用,2017
- 刘斌;谭景焕,大直径塑料管道成型工艺的研究进展,塑料科技,2017
- 刘斌;崔志杰;陈昌乾,模具检测技术现状及发展趋势,模具工业,2017
- 刘斌;崔志杰;谭景焕;吴松琪;柳亚强,模具制造技术现状与发展趋势,模具工业,2017
- 刘斌;崔志杰,模具修复技术及发展趋势,模具工业,2017
- 刘斌;谭景焕,T-模注射成型技术及应用,模具工业,2016
- 刘斌;陈昌乾;张步进,金属与塑料一体化的纳米成型技术及应用,模具工业,2015
- 吴成龙;刘斌;张步跃,3D打印技术在模具行业中的应用现状,2015
- 吴松琪;刘斌,塑件表面模内装饰技术应用现状分析,塑料工业,2015
- 刘海文;刘斌,硅胶透镜注射成型工艺分析与模具设计,模具工业,2015
- 谭景焕;刘斌;吴成龙,基于Moldflow和3D打印的注塑模具随形冷却水道设计,塑料工业,2015
- 刘斌;谭景焕;吴成龙,基于3D打印的随形冷却水道注塑模具设计,工程塑料应用,2015
- 陈昌乾;刘斌;王桂林,电视机小后壳注射成型工艺的优化设计,工程塑料应用,2015
- 刘斌;谭景焕;吴成龙,基于3D打印的随形冷却水道注塑模具设计,2015
- 吴松琪;刘斌;朱训民;王桂林,汽车前保险杠注塑模具热流道热平衡分析及其优化设计,塑料工业,2015
- 刘斌,3D打印技术在模具行业中的应用,2015
- Wang, Quan;Qu, Jinping;Huang, Chaohua;Liu, Bin;Sun, Xiao,Effect of vibration parameters in plasticizing process on properties of polypropylene by dynamic injection molding,Journal of Thermoplastic Composite Materials,2015
- 束军平;刘斌,一种采用拉深与液压胀形的复合成形工艺与模具设计,模具工业,2014
- 刘斌;吴盛金,吹塑模具CAD技术研究与应用现状分析,塑料制造,2014
- 汤文灿;刘斌;蒋仕元,模具企业客户档案管理信息系统的设计,制造业自动化,2014
- 汤文灿;刘斌;蒋仕元,精密注射模柔性制造中的智能调度研究现状分析,模具工业,2014
- 吴松琪;刘斌,叠层注塑模的流道平衡优化设计,塑料工业,2014
- 吴松琪;刘斌;蒋仕元,适于塑料模具电极自动化加工的通用夹具设计与应用,工程塑料应用,2014
- 吴松琪;刘斌,叠层注塑模的流道平衡优化设计,2014
- 闵全钊;刘斌;刘雄飞,子母结构注射模具设计,工程塑料应用,2014
- 李洋;刘斌,塑料壳体三维电路制造技术现状分析与应用,塑料制造,2014
- 吴成龙;刘斌,注塑成型模内组装技术现状与应用,塑料制造,2013
- 吴成龙;刘斌,注射成型模内组装技术现状与应用,2013
- 刘斌;王玉龙;岳潼雁,直通式管材挤出模头智能化设计系统开发及应用,塑料,2013
- 刘斌;李洋;汤少敏,注射成型工艺参数对试样熔接痕拉伸强度的影响,2013
- 易巍;刘斌;贺灿辉,手机面壳模内自动切浇口注射模设计,2013
- 蔡钿;刘斌;邹仕放,塑胶制品中金属回收方法的研究现状分析,塑料,2013
- 吴松琪;刘斌,适于精密塑胶模具电极加工的通用夹具设计与应用,2013
- 刘斌;陈庆鸿;肖运海;孙小文;孙加伟,注射模标准模架导柱车削加工自动生产线设计,2013
- 吴成龙;刘斌,翻盖塑料制品的模内合盖注射模设计,模具工业,2013
- 易巍;刘斌;贺灿辉,手机面壳模内自动切浇口注射模设计,模具工业,2013
- 刘斌;李洋;汤少敏,注射成型工艺参数对试样熔接痕拉伸强度的影响,塑料,2013
- 刘斌;陈庆鸿;肖运海;孙小文;孙加伟,注射模标准模架的导柱车削加工自动生产线研究,塑料制造,2013
- 刘斌;王玉龙;岳潼雁,直通式管材挤出模头智能化设计系统开发及应用,2013
- 刘斌;王玉龙;岳潼雁,基于知识的直通式管材挤出模头智能化设计,塑料,2013
- 孙小文;刘斌,模具电极用夹具的模态分析及结构优化设计,模具工业,2013
- 刘斌;李洋;汤少敏,动态注射成型振动参数对试样熔接痕拉伸强度及结构形态的影响,2013
- 刘斌;李洋;汤少敏,动态注射成型振动参数对试样熔接痕拉伸强度及结构形态的影响,塑料,2013
- 吴成龙;刘斌,注射成型模内组装技术现状与应用,工程塑料应用,2013
- 李洋;刘斌,塑料壳体上三维电路制造技术现状分析与应用,塑料制造,2013
- 刘斌;陈庆鸿;肖运海;孙小文;孙加伟,注射模标准模架导柱车削加工自动生产线设计,模具工业,2013
- 刘斌;孙小文;邱谍,晶须硅对聚碳酸酯性能的影响,塑料科技,2012
- 刘斌;孙加伟;吴盛金,注塑制品表面缺陷自动识别软件的构建,工程塑料应用,2012
- 刘斌;孙小文;邱蝶,硅酮粉对改性PC体系的耐划伤性能的研究,塑料工业,2012
- 刘斌;孙加伟;吴盛金,基于神经网络的注塑制品表面缺陷自动识别方法的研究,塑料工业,2012
- 刘斌;余磊;骆接文,316L不锈钢粉末注射成形喂料流变性能的研究,2012
- 丁志英;刘斌,蒸汽模技术及其应用现状分析,塑料,2012
- 石波;刘斌,注塑成型过程中制品质量的控制研究现状分析,塑料工业,2012
- 孙小文;刘斌;邱谍,抗划伤剂对聚碳酸酯/晶须硅体系性能的影响,中国塑料,2012
- 刘斌;岳潼雁;吴明星,微型挤出过程中熔体流变行为的模拟分析,塑料工业,2011
- Liu, Bin;Liu, Qing-Hui;Qu, Jin-Ping,Research on hygrothermal aging of dynamic injection molded polypropylene products,Materials Science and Technology,2011
- 贺灿辉;刘斌;邹仕放,带金属嵌件的手机外壳注塑成型翘曲变形分析,工程塑料应用,2011
- 刘斌;余磊;骆接文,316L不锈钢粉末注射成形喂料流变性能的研究,粉末冶金工业,2011
- 刘斌;余磊,注塑制品表面模内装饰工艺的质量分析与对策,工程塑料应用,2011
- 余磊;刘斌;陈静波;邱谍;徐建伟,影响多型腔注射模不平衡充填因素的模拟研究,塑料,2011
- 贺灿辉;刘斌;易巍,手机USB塞双色注射模设计,模具工业,2011
- 刘斌;余磊,注塑制品表面模内装饰工艺的质量分析与对策,2011
- 刘斌;贺灿辉,微成形模具制造技术与应用现状分析,2011
- 周婷;刘斌,基于BP人工神经网络的异形透盖注塑件翘曲变形分析,塑料工业,2011
- 冯彦洪;李展洪;瞿金平;刘斌;何和智;伍巍,聚乳酸/剑麻复合材料流变性能表征,化工学报,2011
- 刘斌;刘庆辉;瞿金平,动态注射成型聚丙烯制品的湿热老化性能研究,材料科学与工艺,2011
- 刘斌;汤少敏;邹仕放,塑料表面不导电真空镀膜装饰工艺与质量分析,现代塑料加工应用,2011
- Feng, Yanhong;Shen, Hanzhi;Qu, Jinping;Liu, Bin;He, Hezhi;Han, Liyan,Preparation and Properties of PBS/Sisal-Fiber Composites,Polymer Engineering and Science,2011
- Feng, Yanhong;Li, Zhanhong;Qu, Jinping;Liu, Bin;He, Hezhi;Wu, Wei,Characterization of rheological properties of polylactic acid/sisal fiber composites,Huagong Xuebao/CIESC Journal,2011
- Yan-Hong, Feng;Jin-Ping, Qu;Zhan-Hong, Li;Han-Zhi, Shen;Bin, Liu;Xing-Xing, Yu,Effects of temperature and roll pressing on the properties of iPP sheets,2010
- 刘斌;吴盛金,吹塑模具CAD技术研究与应用现状分析,电加工与模具,2010
- 冯彦洪;李展洪;瞿金平;刘斌;徐百平;王宗明,剑麻纤维增强PBS复合材料的流变性能,华南理工大学学报(自然科学版),2010
- Qu Jinping;Liu Bin;Liu Qinghui;Wu Shengjin,Research on Hygrothermal Aging of Dynamic Injection Molded Polypropylene Products,Key Engineering Materials,2010
- Li, Zhan-Hong;Feng, Yan-Hong;Liu, Bin;Xu, Bai-Ping;Qu, Jin-Ping;He, He-Zhi,Evaluation of rheological parameters of plant fiber/polymer composites in torque rheometer,Polymer Materials Science and Engineering,2010
- Liu Bin;Peng Manhua;Feng Yanhong;Wang Fuzhen,Design and Theoretical Analysis of Mini-plunger Sprayer Used in SW2502 Fused Deposition Modeling System,2010
- Liu Bin;Qiu Die;Zhao Chunzhen,Effect of Mixture of Plasticizer on the Thermoplastics Formability of Polyvinyl Alcohol (PVA),Key Engineering Materials,2010
- Liu Bin;Xie Yi;Wu Mingxing,Research on the micro-extrusion characteristic of mini-screw in the screw extruding spray head,Polymer Bulletin,2010
- 邱谍;刘斌;赵春振,改性聚乙烯醇的力学性能,塑料,2010
- 吴盛金;刘斌,洗衣机翻盖叠层式热流道注射模设计,模具工业,2010
- 吴盛金;刘斌,注塑模具自动分模技术,塑料工业,2010
- Bin, Liu;Manhua, Peng;Yanhong, Feng;Fuzhen, Wang,Design and theoretical analysis of mini-plunger sprayer used in SW2502 fused deposition modeling rapid prototyping system,2010
- Liu Bin;Qiu Die;Zhao Chunzhen,Effect of Mixture of Plasticizer on the Thermoplastics Formability of Polyvinyl Alcohol (PVA),2010
- 刘斌;彭满华,模具多轴数控加工技术的现状与发展,2010
- Feng, Yan-Hong;Li, Zhan-Hong;Qu, Jin-Ping;Liu, Bin;Xu, Bai-Ping;Wang, Zong-Ming,Rheological properties of PBS composites reinforced with sisal fibers,Journal of South China University of Technology(Natural Science Edition),2010
- 李展洪;冯彦洪;刘斌;瞿金平;胡松喜;韩丽燕,PBS/剑麻复合材料制备与性能研究,现代塑料加工应用,2010
- Liu, Bin;Luo, Jie-Wen;Qu, Jin-Ping;Cai, Yi-Xiang,Effects of vibration force field on melt rheological properties and phase isolation during metal-powder injection molding,Journal of South China University of Technology(Natural Science Edition),2010
- 邱谍;刘斌,PC抗划伤的改性性能,塑料,2010
- 刘斌;骆接文;瞿金平;蔡一湘,振动力场对金属粉末注射熔体流变性能及相分离的影响,华南理工大学学报(自然科学版),2010
- Liu Bin;Wu Shengjin;Liu Qinghui;Qu Jinping,Research on Hygrothermal Aging of Dynamic Injection Molded Polypropylene Products,2010
- 刘斌;彭满华;邹仕放,制品表面毛刺去除技术综述,表面技术,2010
- 李展洪;冯彦洪;刘斌;徐百平;瞿金平;何和智,植物纤维/聚合物复合材料流变参数的转矩流变表征方法,高分子材料科学与工程,2010
- Yan-Hong, Feng;Jin-Ping, Qu;Han-Zhi, Shen;He-Zhi, He;Bin, Liu;Song-Ruo, Wang,Effects of steam explosion conditions on the mechanical properties of LDPE/cotton bast composites,2010
- 陈如香;彭响方;刘斌;龚晓叁,塑料配重块收缩率的计算模拟,塑料,2010
- 汤少敏;刘斌,基于Moldflow的打印机上盖制件注塑成型翘曲变形分析,塑料,2010
- 刘斌;吴明星,塑料熔体微型挤出流变行为及形态演变,塑料工业,2010
- 刘斌;赵春振;刘荣亮,基于Pro/ENGINEER的注塑模电极工程图模块设计,工程图学学报,2010
- 陈开源;周南桥;刘斌;麻向军,螺旋芯棒式管材机头内熔体流动的数值模拟,塑料科技,2010
- Feng, Yan-Hong;Qu, Jin-Ping;Li, Zhan-Hong;Shen, Han-Zhi;Liu, Bin;Yu, Xing-Xing,The Effects of Temperature and Roll Pressing on the Properties of iPP Sheets,Polymer - Plastics Technology and Engineering,2010
- 冯彦洪;沈寒知;瞿金平;刘斌;谢小莉;韩丽燕,PBS/蔗渣复合材料的制备与性能,塑料,2010
- Liu, Bin;Wu, Shengjin;Zou, Shifang,Automatic detection technology of surface defects on plastic products based on machine vision,2010
- Liu, Bin;Peng, Manhua;Feng, Yanhong;Wang, Fuzhen,Design and theoretical analysis of mini-plunger sprayer used in SW2502 fused deposition modeling system,2010
- 骆接文;刘斌;陈强;蔡一湘,水溶性MIM粘结剂的制备及性能表征,2010
- Bin, Liu;Qinghui, Liu;Yanhong, Feng;Jinping, Qu,Research on dynamic injection molding for metal powder green part,2009
- 胡清明;刘斌;余熳烨;林颖,基于数值模拟技术镁合金压铸模浇注系统优化设计,模具工业,2009
- 吴盛金;刘斌,Moldflow软件在无绳电话机面板模具设计中的应用,工程塑料应用,2009
- Liu, Bin;Luo, Jie-Wen;Du, Li-Gang;Qu, Jin-Ping,Preparation and property of a water-soluble binder for dynamic injection molding of metal powders,Journal of South China University of Technology(Natural Science Edition),2009
- 邱谍;刘斌;赵春振,改性聚乙烯醇的热塑成型性能研究,塑料科技,2009
- 刘斌;骆接文;彭满华;瞿金平;高威,金属粉末动态注射成型充模过程的理论分析,华南理工大学学报(自然科学版),2009
- Liu, Bin;Xie, Yi;Huang, Xingxing;Feng, Yanhong,Research on the micro-extrusion characteristic of mini-screw in the screw extruding spray head,2009
- 王锐;瞿金平;刘斌;王权,液压脉振注射充模过程的能耗特性研究,塑料工业,2009
- 刘斌;骆接文;杜立刚;瞿金平,金属粉末动态注射成型用水溶性粘结剂的制备及性能,华南理工大学学报(自然科学版),2009
- 刘斌;刘庆辉;瞿金平,动态注射成型聚丙烯制品的热氧老化性能,高分子材料科学与工程,2009
- Chen Kai Yuan;Zhou Nan Qiao;Liu Bin;Jin Gang,Improved Mechanical Properties and Structure of Polypropylene Pipe Prepared Under Vibration Force Field,Journal of Applied Polymer Science,2009
- 陈开源;周南桥;刘斌;李从威;翟丽;步玉磊,液压脉振注塑PP/CaCO_3的结构与力学性能,现代塑料加工应用,2009
- 刘斌;吴明星;刘荣亮,基于Pro/E的注塑模电极模块设计,电加工与模具,2009
- Liu, Bin;Liu, Qing-Hui;Qu, Jin-Ping,Thermal oxidative aging of dynamic injection molded polypropylene products,Polymer Materials Science and Engineering,2009
- 刘斌;吴盛金;邹仕放,基于机器视觉的塑胶制品表面缺陷自动检测技术,塑料工业,2009
- 陈开源;步玉磊;周南桥;刘斌;唐海龙;翟丽,振动力场下PP增强管材的制备及性能研究,工程塑料应用,2009
- Liu, Bin;Luo, Jie-Wen;Peng, Man-Hua;Qu, Jin-Ping;Gao, Wei,Theoretical analysis of filling process in metal-powder dynamic injection molding,Journal of South China University of Technology(Natural Science Edition),2009
- 刘斌;赵春振;吴明星,模具加热与温控方法剖析,模具工业,2009
- 刘斌;吴盛金;骆接文,注射模模内抽真空装置剖析与应用,模具工业,2009
- 彭满华;刘斌;邹仕放,叠层式注塑模具设计与应用现状分析,塑料科技,2009
- 陈开源;周南桥;刘斌;步玉磊;唐海龙;翟丽,振动挤出对HDPE管材耐慢速裂纹增长性能的影响,塑料科技,2009
- 刘斌;吴明星;谢毅,熔融挤压快速成型系统的喷头结构分析,工程塑料应用,2009
- 黄利;瞿金平;刘斌;梁继华,振动强化速冷成型聚丙烯片材的制备与表征,现代塑料加工应用,2009
- 骆接文;刘斌;蔡一湘;刘辛;谢焕文,电磁动态注射成型技术在MIM中的应用研究,2009
- 彭满华;刘斌,Moldflow软件在无绳电话机底盖模具设计中的应用,塑料科技,2009
- Chen Kaiyuan;Zhou Nanqiao;Liu Bin;Wen Shengping,Effect of vibration extrusion on the structure and properties of high-density polyethylene pipes,Polymer International,2009
- 肖运海;刘斌,内嵌支承件圆筒形薄壁塑件注射模设计,模具工业,2008
- 陈开源;周南桥;刘斌;李从威;唐海龙,振动挤出HDPE管材的结构与力学性能,合成树脂及塑料,2008
- 周伟华;刘斌;文生平;瞿金平,脉动注射保压过程中的压力损失,材料科学与工艺,2008
- 刘斌;骆接文,金属粉末注射成型模具流道中熔体的流动分析,热加工工艺,2008
- 刘斌;马骏,Polyflow逆向挤出功能在异型材口模设计中的应用,塑料科技,2008
- Chen, Kaiyuan;Zhou, Nanqiao;Liu, Bin;Li, Congwei;Tang, Hailong,Structure and mechanical properties of vibrating extruded high density polyethylene tubing,China Synthetic Resin and Plastics,2008
- 刘斌;赵春振,塑料波纹管挤出缺陷分析及对策,塑料科技,2008
- 曾武;应继儒;刘斌;瞿金平,原位聚合改性GF/SAN的界面模型及增韧机理研究,塑料科技,2008
- 肖运海;刘斌,浅析塑料异型材软硬共挤出技术,塑料科技,2008
- 肖运海;刘斌,内嵌件大纵深圆筒形薄壁塑件注塑成型工艺与模具设计,塑料科技,2008
- 刘斌;刘荣亮,多型芯周向抽芯注射模设计,模具工业,2008
- 刘斌;赵春振;王保民,熔融沉积成型水溶性支撑材料的研究与应用,工程塑料应用,2008
- 罗武;刘斌,基于UG的管材挤出模头参数化设计,模具工业,2008
- 欧荔苹;刘斌,基于Pro/E二次开发的电极模块参数化设计,机械设计与制造,2008
- 肖运海;刘斌,筒形塑件外圆车削自动定位夹紧芯轴设计,装备制造技术,2008
- 罗敬东;刘斌,基于SolidWorks注射模脱模机构的设计,模具制造,2008
- 刘斌;谢毅;覃孟然,24腔齿轮传动旋转脱螺纹注射模设计,模具工业,2008
- 刘斌;谢毅,熔融沉积快速成型系统喷头应用现状分析,工程塑料应用,2008
- Zhou, Wei-Hua;Liu, Bin;Wen, Sheng-Ping;Qu, Jin-Ping,Pressure losses in the packing stage of pulsatiled injection molding,Materials Science and Technology,2008
- 刘斌;谢毅,材料流变性能对注塑制品熔接痕的影响,工程塑料应用,2008
- 陈开源;周南桥;刘斌,CAE技术在注塑模浇口优化设计中的应用,现代塑料加工应用,2008
- 刘斌;赵春振,薄壁注塑成型中的变模温控制技术,塑料科技,2008
- Feng Yan Hong;Qu Jin Ping;He He Zhi;Liu Bin;Cao Xian Wu;Wen Sheng Ping,Effect of the axial vibration of screw on total shear strain distribution of melt in single-screw extruders,Journal of Applied Polymer Science,2008
- 刘斌;刘庆辉;马骏,塑料异型材软硬共挤模设计,模具工业,2008
- 刘庆辉;刘斌;覃孟然,带内螺纹塑件的新型脱模机构设计,模具工业,2007
- 刘斌;覃孟然;冯彦洪;瞿金平,大型注射模型腔刚度优化分析,模具工业,2007
- 王权;刘斌;瞿金平,电磁动态金属粉末注射成型型坯结构性能的研究,稀有金属材料与工程,2007
- 周伟华;刘斌;瞿金平,振动力场下背压对喷嘴内熔体压力的影响,塑料科技,2007
- 覃孟然;刘斌,整圆内侧倒扣塑件的3种脱模方式,模具工业,2007
- 刘斌;覃孟然;冯彦洪,整圆内侧倒扣塑料件的联合脱模机构,工程塑料应用,2007
- 刘斌;马骏,塑料异型材软硬共挤技术的研究现状与趋势,塑料工业,2007
- 冯彦洪;刘斌;晋刚;曹贤武;何和智;瞿金平,幂律流体三维脉动流场数值模拟,现代塑料加工应用,2007
- Wang, Quan;Liu, Bin;Qu, Jinping,Research on structural performance of green parts for electromagnetic dynamic metal powder injection molding,Rare Metal Materials and Engineering,2007
- Qu Jin ping;Zhou Weihua;Liu Bin;Pan Wenzhe,Experimental study on the influence of Pulsatile injection pressure on filling pressure and filling time,Polymer - Plastics Technology and Engineering,2007
- 刘庆辉;刘斌,Moldflow软件在手机外壳模具设计中的应用,塑料科技,2007
- 刘荣亮;刘斌,应用Moldflow软件分析优化手机后盖壳注塑模设计,工程塑料应用,2007
- 刘斌;覃孟然,基于HyperMesh的Moldflow中性面网格实现技术,塑料科技,2007
- 欧荔苹;刘斌,带内螺纹塑料制品气体顶出的注塑模具设计,工程塑料应用,2007
- 刘斌;乐燕,影响注塑制品脱模的因素分析及对策,塑料工业,2007
- 何亮;刘斌;瞿金平,电磁振动对金属粉末注射成形型坯密度的影响,粉末冶金工业,2006
- Liu, Bin;Feng, Yanhong;Qu, Jinping,Research on dynamic injection molding technology for metal powder green part,China Mechanical Engineering,2006
- 冯彦洪;瞿金平;刘斌;何和智;晋刚;邹新良,振动力场作用下单螺杆塑化熔融过程数值模拟,华南理工大学学报(自然科学版),2006
- 刘斌;冯彦洪;瞿金平,金属粉末型坯动态注射成形技术的研究,中国机械工程,2006
- 何亮;刘斌;瞿金平,电磁振动对金属粉末注射型坯结构均匀性的影响,广东轻工职业技术学院学报,2006
- 覃孟然;刘斌,一种新颖的注塑模具内缩机构设计,工程塑料应用,2006
- 欧荔苹;刘斌;文劲松,注射成型流动模拟技术的发展,塑料制造,2006
- 刘斌;覃孟然,注塑整圆内侧倒扣塑料件的分步抽芯法,工程塑料应用,2006
- Feng, Yan-Hong;Qu, Jin-Ping;Liu, Bin;He, He-Zhi;Jin, Gang;Zou, Xin-Liang,Numerical simulation of melting process in single-screw extruder under vibration force field,Journal of South China University of Technology(Natural Science Edition),2006
- 冯彦洪;瞿金平;刘斌;晋刚;曹贤武;何和智,振动诱导单螺杆挤出机熔融过程实验研究,塑料工业,2006
- 丘宏扬;陈松茂;刘斌,快速成形系统中STL文件切片算法的研究,锻压技术,2005
- 徐百平谢芳刘斌曹贤武晋刚何和智彭响方瞿金平,单螺杆挤出机中非牛顿流体层流混合停留时间表征,上海塑料,2005
- 文劲松;麻向军;刘斌;晋刚;瞿金平,塑料成型加工模拟技术及软件应用,计算机辅助工程,2003
- 史步海;丁川;刘斌,基于PLC的智能PID算法在延伸率控制中的应用,工业仪表与自动化装置,2003
- 刘斌;史步海;何和智;瞿金平,快速成形技术中STL数据模型的浓淡处理,计算机应用研究,2002
- 史步海;刘斌;丁川,铝带拉弯矫直机延伸率智能控制系统,机电一体化,2002
- 刘斌;阮锋;黄树槐,分层实体制造技术中激光切割路径的优化,华南理工大学学报(自然科学版),2001
- 刘斌;阮锋;王福祯;史步海,熔融堆积成型系统中支撑结构自动生成算法的研究,机电工程技术,2001
- Liu, B.;Ruan, F.;Huang, S.,Optimization of laser cutting paths in laminated object manufacturing technology,Journal of South China University of Technology(Natural Science Edition),2001
- 黄珍媛;阮锋;李振南;周驰;刘斌,异型管件的逐次塑性成形研究,机电工程技术,2001
- 刘斌;张征;孙延明;张世俊,快速成型系统中OFFSET型填充算法,华南理工大学学报(自然科学版),2001
- Liu, B.;Zhang, Z.;Sun, Y.;Zhang, S.,The algorithm of OFFSET hatch in rapid prototyping and manufacturing system,Journal of South China University of Technology(Natural Science Edition),2001
- 丘宏扬;谢嘉生;刘斌,快速成型技术研究中的若干关键问题,锻压机械,2001
- 刘斌;孙延明;张世俊,平面多边形顶点的凹凸性快速自动识别方法,计算机应用与软件,2000
- 张征;刘斌;成晓阳;郭智泉,工业机器人的三维实体造型与运动学约束,组合机床与自动化加工技术,2000
- 张世俊;吴鹄翔;刘斌;孙延明,水壶壶身的胀形工艺及模具,新技术新工艺,1999
- Sun, Yan-Ming;Luo, Wen;Liu, Bin;Ruan, Feng;Yin, Guo-Fu,Method of design hydraulic cylinders based on CBR,Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design &Computer Graphics,1999
|
